DRIPTROIT 71

I posted a few reference pictures in the 1:1 section. You can see on that one the like most road tractors, the exhaust and blower are on the passenger side.

Both are great and I believe both to be descendants of the Clint Freeman original. Pros of Moluminum: 1. I like Jamie’s resin better. It is easier to get paint to stick. 2. Jamie’s comes with a turbo option and an aluminum style valve cover option 3. Jamie’s parts may be a little cleaner Pros of Gary’s 1. I like his solid 1 piece solid block with separate flywheel housing 2. extremely versatile. Can be built left or right hand blower, or left or right hand exhaust, 4 options total. 2 oil pan options and a couple of exhaust manifold options. (Jamie’s is right hand blower only as was Clint Freeman’s) 3. All of the engines that I have gotten from Gary had directions for those who need them. I have used all 3, and even the much lower quality 6-71 that was once offered by Spaulding Trading and Shipping. Clint Freeman stuff is very hard to find now days. Out of all of them, I just like Gary’s the best, but you won’t be disappointed either way you go. The 6-71 is my favorite engine to put into a model truck.

Thanks Vince!! The 6-71 is my favorite engine to put in a build. Gary Wallace’s version is the best!

I personally wouldn’t be able to do a contract build like this, but you may find someone either here or on the MCM forum that might. This can get very expensive though. The Peterbilt is available in two different kit forms, but depending on how accurate you want to be, the livestock trailer that is available in kit form is a pretty old version. Man hours could get pretty high on something like this as well.

It was just a single sale. It wasn’t brand new when I bought it. I will try to dig it out of the closet soon. I think it might be a GMC.

I found it on Ebay. It may be an old P&P cab. RMR still lists one, so it may be from them too. The quality of this one isn’t great, but I think that I will be able to do something with it. I used to help a guy who had a C60 log truck. I’m going to try to make something similar to his truck, one day anyway.

You really did a great job on this one! Excellent work! I hope to build a similar project except mine will be a log truck and it didn’t have a tilt front. I’m going to cheat and use a resin cab. I don’t know that I would be able to accomplish what you have done here. Looks great!

Finally back to this one after half of a year.

Looks like you guys have plenty to keep you busy. I haven’t touched a model since June. I have had a couple of home projects and still one to finish. I’ve been messing with antique clocks too for some reason, as well as my Chevrolet truck. I’m hoping to finish several in 2022 though. First I have to finish the Paystar. I won’t let myself start another project without finishing one. Second for the year is a CO 4070a Glosson truck. Glosson Motor Lines was a freight hauler here in Lexington for many years. They specialized in hauling furniture. They had over 100 CO 4070a’s and COF 4070a’s. Third I plan to build a CF Freightliner pusher truck. They used these trucks to push rigs over Donner Summit in the snow. I’m not sure about the fourth. I have at least three Carolina Freight projects planned including a DC 100 Autocar, a WT 9000 Ford, and a 4070a with windows in the sleeper. Of course I have to built some type of dump truck this year.

Very nice!! I like it!! Great work!!

I can see now! Looks great!

Welcome!! Good looking builds there!

Here is a picture where you can see the lines attached.

For some reason, I can’t see the latest pictures.

Simple answer: practice Everyone has different methods of painting, find what works best for you, and that takes trial and error. I am definitely not the greatest painter, but I personally like lacquer and usually use spray cans. I build a lot of resin so I like to use self etching primer as well. I usually sand the primer with 600 or finer sandpaper. Your paint will only be as slick as your primer. Make sure that you have a clean surface with blemishes removed before primer. Make sure to apply primer and paint in light coats. The actual spraying takes practice to get the feel of it. I usually do not go for high gloss paint jobs myself, but when I have, I used Testor high gloss clear. Once the clear is good and dry, do not recoat unless you sand the clear first. You can also finish with a polish job with ultra fine sandpapers and polish. Like I said, there are many methods, get some cheap kits if you can to practice on and go for it. Even the best builders have paint mishaps, so don’t worry if you do.

Are you using the Revell of Germany frame on this one or is that just for inspiration?

Thanks! Yes sir, all the clear plastic cases are from Hobby Lobby.

Welcome aboard!!

Welcome aboard!

Welcome back Kerry!!

X2

Great looking build! I always liked that show.

Excellent work as always Charles!! I really like the pump unit! Those flathead Chrysler engines were used in a variety of applications including tractors.

Sounds like a great project! Looking forward to seeing it!