Mike Posted August 7, 2016 Need some help. I am not sure of how the air brake actuator gets mounted on both rear axles. Does it get mounted flush against the backing plate? Share this post Link to post Share on other sites
0 trucker Posted August 8, 2016 here is how I mounted mine, hope this helps. 1 Share this post Link to post Share on other sites
0 Mike Posted August 9, 2016 Trucker, Thank you very much. Great help. The thing that was confusing me is that the shafts that are supposed to extend through the backing plate are to short on the parts that came with the kit. Guess I have to extend them. Thanks agailn. Share this post Link to post Share on other sites
0 trucker Posted August 9, 2016 no problem. just have to be sure they don't hit the inside tires. Share this post Link to post Share on other sites
0 Casey Posted August 10, 2016 Thanks for the help @trucker! --Casey Share this post Link to post Share on other sites
0 Goodwrench3 Posted January 24, 2020 Yeah the instructions for the brakes are terrible. I fought with the same thing on the Pete 352 kit (same frame). Share this post Link to post Share on other sites
Need some help. I am not sure of how the air brake actuator gets mounted on both rear axles. Does it get mounted flush against the backing plate?
Share this post
Link to post
Share on other sites